Dissimilar Metals LaserWelding between DP1000 Steel and Aluminum Alloy 1050

Ver registo simples
dc.contributor.authorMarques, Pedro Carmona
dc.contributor.authorPereira, António
dc.contributor.authorCabrinha, Ana
dc.contributor.authorRocha, Fábio
dc.contributor.authorFernandes, Fábio A. O.
dc.contributor.authorSousa, Ricardo
dc.contributor.institutionEscola de Comunicação, Arquitetura, Artes e Tecnologias da Informação
dc.date.issued2019
dc.descriptionMetals
dc.description.abstractThe welding of dissimilar metals was carried out using a pulsed Nd: YAG laser to join DP1000 steel and an aluminum alloy 1050 H111. Two sheets of each metal, with 30 14 1 mm3, were lap welded, since butt welding proved to be nearly impossible due to the huge thermal conductivity differences and melting temperature differences of these materials. The aim of this research was to find the optimal laser welding parameters based on the mechanical and microstructure investigations. Thus, the welded samples were then subjected to tensile testing to evaluate the quality of the joining operation. The best set of welding parameters was replicated, and the welding joint obtained using these proper parameters was carefully analyzed using optical and scanning electron microscopes. Despite the predicted difficulties of welding two distinct metals, good quality welded joints were achieved. Additionally, some samples performed satisfactorily well in the mechanical tests, reaching tensile strengths close to the original 1050 aluminum alloy.en
dc.description.statusNon peer reviewed
dc.formatapplication/pdf
dc.identifier.citationMarques , P C , Pereira , A , Cabrinha , A , Rocha , F , Fernandes , F A O & Sousa , R 2019 , ' Dissimilar Metals LaserWelding between DP1000 Steel and Aluminum Alloy 1050 ' , Metals .
dc.identifier.issn2075-4701
dc.language.isoeng
dc.publisherMultidisciplinary Digital Publishing Institute (MDPI)
dc.relation.ispartofMetals
dc.rightsopenAccess
dc.subjectLASER
dc.subjectENGENHARIA ELETROTÉCNICA
dc.subjectENGENHARIA MECÂNICA
dc.subjectSOLDADURA
dc.subjectAÇO
dc.subjectALUMÍNIO
dc.subjectPROCESSOS DE SOLDADURA
dc.subjectLIGAS DE ALUMÍNIO
dc.subjectSTEEL
dc.subjectALUMINUM
dc.subjectELECTROTECHNICAL ENGINEERING
dc.subjectMECHANIC ENGINEERING
dc.subjectWELDING
dc.subjectLASER
dc.subjectWELDING PROCESSES
dc.subjectALUMINUM ALLOY
dc.titleDissimilar Metals LaserWelding between DP1000 Steel and Aluminum Alloy 1050en
dc.typearticle

Ficheiros

Principais
A mostrar 1 - 1 de 1
Miniatura indisponível
Nome:
Dissimilar-metals-laser-welding-between-DP1000-steel-and-aluminum-alloy-10502019MetalsOpen-Access.pdf
Tamanho:
8.94 MB
Formato:
Adobe Portable Document Format
Ver/Abrir
Licença
A mostrar 1 - 1 de 1
Miniatura indisponível
Nome:
license.txt
Tamanho:
1.71 KB
Formato:
Item-specific license agreed upon to submission
Descrição:
Ver/Abrir

Coleções

MOVLAB - Artigos de Revistas Internacionais com Arbitragem Científica